MSC 10 Marine Satellite Compass

Part Number 010-02407-00

BUY NOW

Feature
Specs
In The Box
Update
Accessories

KNOW EXACTLY WHERE YOU'RE HEADED

Get reliable, accurate heading information with the easy-to-install GPS-based MSC 10 marine satellite compass.

Accuracy comes easy when you’ve got a multi-band GNSS receiver on board.

Faster updates. More detailed tracking.

Rough waters got you worried? MSC 10 delivers pitch, roll and heave info, too.

If other onboard systems need a heading sensor, we’ve got you covered.

Head out confidently.

MULTI-BAND GNSS AND MULTI-CONSTELLATION

The multi-band GNSS (L1 and L5 GPS) and multi-constellation (GPS, Galileo, GLONASS and BeiDou) receiver delivers precise positioning¹.

BOAT HEAVE AND MORE

Get reliable, accurate boat heave, pitch and roll information — even in rough waters.

BUILT-IN ATTITUDE HEADING REFERENCE SYSTEM (AHRS)

With a fully integrated attitude and heading reference system for better GPS heading at all speeds, including pitching in rough seas, taking sharp turns or standing still.

ACCURATE HEADING DATA

Multiple receivers deliver heading accuracy within 2 degrees. Because it uses satellite signals, you don’t have to worry about magnetic interference.

PRIMARY SENSOR ACROSS MULTIPLE SYSTEMS

You can use MSC 10 as the primary sensor for autopilots and other onboard systems that need accurate heading information.

NMEA 2000 NETWORK COMPATIBLE

Get heading, pitch, heel and heave information delivered straight to your compatible Garmin chartplotter via the NMEA 2000 network.

Built for a better boating experience.

EASY TO INSTALL

This compact device is simple to install and easily integrates into your Garmin marine ecosystem.

10 HZ UPDATE RATE

Get better, more detailed tracking information, thanks to the 10 Hz position update rate.

BACKUP HEADING SENSOR

In the extremely rare case that you lose satellite signal, MSC 10 will seamlessly transition from GPS-based to magnetometer-based heading².

¹< 1 meter CEP, < 3 meters 95%

²Magnetometer calibration required for backup magnetic heading support

Dimensions (W x D x H): 6.1” x 13.1” x 3.0” (155.5 x 333.6 x 76.2 mm)
Weight: 28.6 oz (810 g)
Cable length: 19 ft 8 in (6 m)
Temperature range: 5° F to 158° F (-15° C to 70° C), white; 5° F to 140° F (-15° C to 60° C), black
Case material: Glue sealed, high-impact plastic alloy; waterproof to IPX7
Compass-safe distance: 0" (0 mm)
Power source input: 9-32 Vdc, unregulated
Input current: 180 mA at 12 Vdc
NMEA 2000 Load Equivalency Number (LEN): 6 (300 mA max)
Position accuracy, typical marine use: < 1 meter CEP, < 3 meters, 95%
Heading accuracy: 2° RMS
Heave accuracy: 8 cm RMS

MSC-10 Marine Satellite Compass
Pole mount
Mounting hardware
NMEA 2000^® backbone/drop cable (6 meters)
NMEA 2000 T-connector
Documentation