\n
Interested to find out more about Omron E3AS Photoelectric Sensors? Feel free to contact us!<\/strong><\/p>\n\n\t\t\t\t\t\t
Different ways of using OMRON E3AS Series<\/h2>\n<\/div>\n[\/vc_column_text][tabbed_section style=”vertical” tab_color=”Accent-Color” vs_content_animation=”fade” vs_link_animation=”opacity” vs_navigation_alignment=”left” vs_navigation_width_2=”25%” vs_navigation_func=”default” vs_navigation_width=”regular” vs_navigation_spacing=”15px” vs_navigation_mobile_display=”visible” vs_tab_spacing=”5%”][tab icon_family=”none” title=”Multi-lane conveyor lines of targets with curved surface” id=”1699582560743-7″ tab_id=”1699582560744-1″][vc_column_text]\n\nE3AS-HL for multi-lane conveyor lines of targets with curved surface<\/strong><\/span><\/h3>\n\n\n\n![\"Sensor](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as-hl_banner_multi-lane_sol.jpg\")
<\/figure>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n\nStably detects cans and plastic bottles without reflectors<\/strong><\/p>\n\n\n\n![\"Sensor](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as-hl_banner_detection_sol.jpg\")
<\/figure>\n<\/div>\n\nLeft image:<\/strong>\u00a0Retro-reflective sensors are used to detect poorly reflective curved surfaces of cans and transparent plastic bottles, but securing installation space for reflectors on multi-lane conveyor lines is difficult.<\/p>\nRight image:<\/strong> The E3AS-HL Sensor, a reflective model capable of detecting the slightest change in the incident light level or distance, can stably detect cans and plastic bottles without reflectors.<\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Complex-shaped, colored, patterned or glossy targets” id=”1699582560790-9″ tab_id=”1699582560791-10″][vc_column_text]\nE3AS-HL for complex-shaped, colored, patterned or glossy targets<\/strong><\/span><\/h3>\n\n\n\n![\"Sensors](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as-hl_banner_complex-shaped_sol.jpg\")
<\/figure>\n<\/div>\n\nLeft image:<\/strong>\u00a0With spot beam, detection is unstable since the reflected light does not reach the sensor depending on the profile of the target surface. With the line beam of the E3AS-HL Sensor, detection is less affected by the profile of the surface since the reflected light reaches the sensor from any part of the surface.<\/p>\nRight image:<\/strong> Detection is prone to be unstable because color, pattern or reflectivity affects the sensing distance. The E3AS-HL Sensor is less likely to be affected by them, providing stable detection even when packaging materials change.<\/div>\n<\/section>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Long-distance sensing on converging and diverging lines” id=”1699582560828-8″ tab_id=”1699582560829-7″][vc_column_text]\n\nE3AS-F for long-distance sensing on converging and diverging lines<\/strong><\/span><\/h3>\n\n\n\n![\"Sensors](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as-hl_banner_long-distance1_sol.jpg\")
<\/figure>\n<\/div>\n\nNo reflector is required to design long-distance sensing unaffected by color or material of targets<\/p><\/div>\n<\/section>\n\n\n![\"Sensor](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as-hl_banner_long-distance2_sol.jpg\")
<\/figure>\n<\/div>\n\nAlthough retro-reflective sensors are used for long-distance sensing in converging and diverging lines, it is difficult to find installation space for reflectors.<\/p>\n
The E3AS-HL Sensor, a reflective model with long sensing distance, does not require reflectors. Moreover, it is less likely to be affected by color even from long distances.<\/p>\n
TOF method enables the detection of various workpieces on the conveyor line<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n\n\n\n\n![\"Sensors](\"https:\/\/8z1xg04k.tinifycdn.com\/images\/e3as_tof_method_banner_sol.jpg\")
<\/figure>\n<\/div>\n\nWith conventional photoelectric sensors, prior evaluation was required for each workpiece to be detected. E3AS-F Sensors detect workpieces varying in colors and materials by the set distance. This helps reduce evaluation and adjustment time. Also, they do not detect workers working near the line by mistake.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Inclined and close mounting” id=”1699582560867-3″ tab_id=”1699582560867-9″][vc_column_text]\n
E3AS-HL for inclined and close mounting<\/span><\/h3>\nInstall regardless of workpiece shape and angle<\/strong><\/p>\n![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_813-296395.jpg\")
<\/p>\n
\n\nCurved surfaces of metal workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide-angle, making setup eas<\/p>\n
![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_913-296396.jpg\")
<\/div>\n<\/div>\n
\n\nCurved surfaces of low-reflective workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide angle, making setup easy.<\/p>\n
Install in confined spaces or near lights<\/strong><\/p>\n![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_1013-301400.jpg\")
<\/div>\n<\/div>\n
\n\nInterference with other sensors must be considered during design. E3AS-HL Sensors prevent mutual interference between up to 4 sensors, allowing close installation for applications like item identification from hole positions.<\/p>\n
![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_1113-301401.jpg\")
<\/div>\n<\/div>\n
\n\nEffects of lights for cameras and sunlight must be considered during design. E3AS-HL Sensors can be operated under ambient illumination of 20,000 lx, which reaches the best in class level *2. This allows you to install the sensors in the vicinity of lights.<\/p>\n
Sensing algorithm detects minimal reflected light from curved surface [PATENTED]<\/strong><\/p>\nThe E3AS-HL Sensor is the industry-first laser Class 1 CMOS laser sensor that comes equipped with an FPGA.<\/p><\/div>\n<\/div>\n
\n\nIt performs high-speed sampling of received light waveforms at 10,000 times per second and OMRON\u2019s unique accumulation processing, significantly increasing its sensitivity. It amplifies the slightest amount of light to reliably detect workpieces with glossy surfaces, complex shaped workpieces, black rubber, or other workpieces from which it is difficult to receive reflected light<\/p>\n
![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_1213-301402.jpg\")
<\/div>\n<\/div>\n[\/vc_column_text][\/tab][\/tabbed_section][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\n
Features of OMRON E3AS Series<\/h2>\n
<\/p>\n
1. Antifouling coating on sensing surface<\/span><\/strong><\/h3>\n\nEnsures stable operation\u00a0even in harsh environments<\/strong><\/p>\n\n\nWhen a sensor malfunction or breakage due to the environment causes a line stoppage during mass production, it can take a long time to restart. With the protected sensing surface, the E3AS Series helps minimize line downtime and maximize uptime.<\/p>\n
Reduces false detection and cleaning frequency [PATENT PENDING]<\/strong><\/p>\nA dirty sensing surface can cause false detection due to the principle of photoelectric sensors. The E3AS Series has an industry-first antifouling coating on the sensing surface which prevents oil mist and dust from sticking to the sensing surface and keeps the lens from fogging as well. This reduces false detection and sensing surface cleaning frequency.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7467″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]Prevents contamination on the sensing surface<\/strong><\/p>\nDirty sensing surface can cause false detection due to the principle of photoelectric sensors. E3AS Series with the antifouling coating on the sensing surface, which is the industry’s first, prevents water droplets, oil, and dust from sticking to the sensing surface, and keeps the lens from fogging as well. Therefore, the coating prevents contamination on the sensing surface in environments where oil or dust scatters, or steam generates. False detection and cleaning frequency are also reduced.<\/p>\n
\n\nAir blow unit enhances the effectiveness of antifouling coating [PATENTED]<\/strong><\/p>\nUsing an air blow unit greatly reduces the frequency of false detections since it prevents the sensing surface of sensors installed in confined, difficult to clean locations from becoming contaminated. It can be mounted to any photoelectric sensor with a 25.4 mm mounting hole pitch as well as the E3AS Sensors.<\/p><\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7457″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][vc_column_text]\n
\n<\/h3>\n2. Front protection cover reduces sensor failures<\/span><\/h3>\n\n\nWelding spatter on the sensing surface or collision during operation can cause a sensor failure, and the sensor sometimes need to be replaced. Mounting the front protection cover prevents sensor failures. When any problems occur with the front protection cover, just replace it. There is no need to replace the sensor and rewire it.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7458″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\nUnique case design reduces the frequency of replacements caused by failure<\/strong><\/p>\n\n\nThe sensor case is made of stainless steel (SUS316L). OMRON\u2019s unique laser welding technology for different materials enhances the sealing and adhesion between the stainless steel and resin. The laser welding technology for metals are used to weld the case and cover of the E3AS-F Sensor for secure sealing and adhesion between the stainless steel.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7459″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n
\n3. Laser welding technology<\/strong><\/span><\/h3>\nLaser welding technologies for different materials\/metals for increased environmental resistance<\/strong><\/div>\n[\/vc_column_text][image_with_animation image_url=”7460″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\nThe sensor case is made of stainless steel (SUS316L). Omron\u2019s two unique technologies, laser welding technology for different materials and laser welding technology for metals, enhanced the sealing and adhesion between stainless steel and resin.<\/p>\n
Laser welding technology for different materials<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7461″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\n\n\n\n\nIt is a technology to weld different materials, resin and metal, using laser beams. Small holes are bored into the metal case, then melt the resin part by laser. The melted resin fills the holes for secure sealing and adhesion.<\/p>\n
Laser welding technology for metals<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7462″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe metal case and cover are welded by a laser beam to seal the gaps. This provides higher airtightness compared to adhesives, keeping out water, oil and other substances to reduce failures.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n
<\/h3>\n4. Aesthetic of Sensor<\/span><\/h3>\nFlexible installation saves design time<\/strong><\/p>\n\n\nSensor space limitations make equipment design and retrofit work complicated, resulting in time-consuming work. The E3AS Series can be installed in challenging locations, which reduces design and commissioning time.<\/p>\n
\n\nOLED display and teaching enable easy, quick, and optimal setting<\/strong><\/p>\n\n\nE3AS Sensors allow virtually anyone to set optimal settings on the easy-to-read OLED display using the teaching method. Moreover, easy-to-standardize operability makes remote instructions simple.<\/p>\n
Easy-to-read, easy-to-understand OLED display [CMOS E3AS-HL]<\/strong><\/div>\n<\/div>\n\n\nDisplaying the threshold level and detected value on the same screen makes threshold level setting easy. In addition, wide viewing angle and display inverting allow on-site workers to easily see the display.<\/p><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7463″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\nSingle teach button prevents inconsistent settings<\/strong><\/p>\n\n\nEasily and consistently set the optimal threshold level using the teach button.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7464″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\n5. Fast and easy setup also when setting a large number of sensors<\/span><\/h3>\n\n\nSensitivity adjustment using the conventional adjuster method requires experience, finesse as well as time since the threshold level must be adjusted one unit at a time.
\nWith the E3AS Series, just press the teach button to automatically set the threshold level, enabling fast and easy setting.<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7465″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\nLine commissioning and maintenance with less people in less time with IO-Link<\/strong><\/p>\n\n\nWith IO-Link, reduce commissioning time by batch-setting the sensors and cut troubleshooting time during mass production by utilizing field data.<\/p><\/div>\n
![\"E3AS](\"https:\/\/www.ia.omron.com\/Images\/3779_fe_2813-301489.jpg\")
<\/div>\n<\/div>\nReduce commissioning time by batch-writing settings from IO-Link device configuration tool<\/strong><\/p>\n\n\nSetting information can be batch-written to thousands of sensors on a line, effectively reducing commissioning time and inconsistent settings.<\/p>\n
Predictive monitoring and quick recovery by checking and monitoring sensor data<\/strong><\/div>\n<\/div>\n\n\nThe monitor shows light intensity decrease due to sensing surface contamination or other reason, allowing users to take proactive actions to prevent potential false detections. This reduces the frequency of unexpected failures.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7466″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]Look inside the E3AS photoelectric sensor: 3D blowout video<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=MfKBj5fefl0&t=4s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nOmron E3AS Photoelectric Sensors | Easy selection for any application<\/strong><\/p>\n[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=fmOh2wARKts&t=1s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]OMRON E3AS Photoelectric Sensors | Flexible to design for Food Industry without reflectors.<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=epyeroL4Sn0&t=62s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”center” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/product\/omron-e3as\/” text=”View Product”][\/vc_column][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” open_new_tab=”true” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/wp-content\/uploads\/2021\/02\/Omron_Automotive_E3AS_compressed.pdf” text=”View Brochure”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][divider line_type=”No Line”][vc_column_text css=”” text_direction=”default”]\n\n
E3AS-HL for multi-lane conveyor lines of targets with curved surface<\/strong><\/span><\/h3>\n\n\n\n<\/figure>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n\nStably detects cans and plastic bottles without reflectors<\/strong><\/p>\n\n\n\n<\/figure>\n<\/div>\n\nLeft image:<\/strong>\u00a0Retro-reflective sensors are used to detect poorly reflective curved surfaces of cans and transparent plastic bottles, but securing installation space for reflectors on multi-lane conveyor lines is difficult.<\/p>\nRight image:<\/strong> The E3AS-HL Sensor, a reflective model capable of detecting the slightest change in the incident light level or distance, can stably detect cans and plastic bottles without reflectors.<\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Complex-shaped, colored, patterned or glossy targets” id=”1699582560790-9″ tab_id=”1699582560791-10″][vc_column_text]\nE3AS-HL for complex-shaped, colored, patterned or glossy targets<\/strong><\/span><\/h3>\n\n\n\n<\/figure>\n<\/div>\n\nLeft image:<\/strong>\u00a0With spot beam, detection is unstable since the reflected light does not reach the sensor depending on the profile of the target surface. With the line beam of the E3AS-HL Sensor, detection is less affected by the profile of the surface since the reflected light reaches the sensor from any part of the surface.<\/p>\nRight image:<\/strong> Detection is prone to be unstable because color, pattern or reflectivity affects the sensing distance. The E3AS-HL Sensor is less likely to be affected by them, providing stable detection even when packaging materials change.<\/div>\n<\/section>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Long-distance sensing on converging and diverging lines” id=”1699582560828-8″ tab_id=”1699582560829-7″][vc_column_text]\n\nE3AS-F for long-distance sensing on converging and diverging lines<\/strong><\/span><\/h3>\n\n\n\n<\/figure>\n<\/div>\n\nNo reflector is required to design long-distance sensing unaffected by color or material of targets<\/p><\/div>\n<\/section>\n\n\n<\/figure>\n<\/div>\n\nAlthough retro-reflective sensors are used for long-distance sensing in converging and diverging lines, it is difficult to find installation space for reflectors.<\/p>\n
The E3AS-HL Sensor, a reflective model with long sensing distance, does not require reflectors. Moreover, it is less likely to be affected by color even from long distances.<\/p>\n
TOF method enables the detection of various workpieces on the conveyor line<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n\n\n\n\n<\/figure>\n<\/div>\n\nWith conventional photoelectric sensors, prior evaluation was required for each workpiece to be detected. E3AS-F Sensors detect workpieces varying in colors and materials by the set distance. This helps reduce evaluation and adjustment time. Also, they do not detect workers working near the line by mistake.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Inclined and close mounting” id=”1699582560867-3″ tab_id=”1699582560867-9″][vc_column_text]\n
E3AS-HL for inclined and close mounting<\/span><\/h3>\nInstall regardless of workpiece shape and angle<\/strong><\/p>\n<\/p>\n
\n\nCurved surfaces of metal workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide-angle, making setup eas<\/p>\n
<\/div>\n<\/div>\n
\n\nCurved surfaces of low-reflective workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide angle, making setup easy.<\/p>\n
Install in confined spaces or near lights<\/strong><\/p>\n<\/div>\n<\/div>\n
\n\nInterference with other sensors must be considered during design. E3AS-HL Sensors prevent mutual interference between up to 4 sensors, allowing close installation for applications like item identification from hole positions.<\/p>\n
<\/div>\n<\/div>\n
\n\nEffects of lights for cameras and sunlight must be considered during design. E3AS-HL Sensors can be operated under ambient illumination of 20,000 lx, which reaches the best in class level *2. This allows you to install the sensors in the vicinity of lights.<\/p>\n
Sensing algorithm detects minimal reflected light from curved surface [PATENTED]<\/strong><\/p>\nThe E3AS-HL Sensor is the industry-first laser Class 1 CMOS laser sensor that comes equipped with an FPGA.<\/p><\/div>\n<\/div>\n
\n\nIt performs high-speed sampling of received light waveforms at 10,000 times per second and OMRON\u2019s unique accumulation processing, significantly increasing its sensitivity. It amplifies the slightest amount of light to reliably detect workpieces with glossy surfaces, complex shaped workpieces, black rubber, or other workpieces from which it is difficult to receive reflected light<\/p>\n
<\/div>\n<\/div>\n[\/vc_column_text][\/tab][\/tabbed_section][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\n
Features of OMRON E3AS Series<\/h2>\n
<\/p>\n
1. Antifouling coating on sensing surface<\/span><\/strong><\/h3>\n\nEnsures stable operation\u00a0even in harsh environments<\/strong><\/p>\n\n\nWhen a sensor malfunction or breakage due to the environment causes a line stoppage during mass production, it can take a long time to restart. With the protected sensing surface, the E3AS Series helps minimize line downtime and maximize uptime.<\/p>\n
Reduces false detection and cleaning frequency [PATENT PENDING]<\/strong><\/p>\nA dirty sensing surface can cause false detection due to the principle of photoelectric sensors. The E3AS Series has an industry-first antifouling coating on the sensing surface which prevents oil mist and dust from sticking to the sensing surface and keeps the lens from fogging as well. This reduces false detection and sensing surface cleaning frequency.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7467″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]Prevents contamination on the sensing surface<\/strong><\/p>\nDirty sensing surface can cause false detection due to the principle of photoelectric sensors. E3AS Series with the antifouling coating on the sensing surface, which is the industry’s first, prevents water droplets, oil, and dust from sticking to the sensing surface, and keeps the lens from fogging as well. Therefore, the coating prevents contamination on the sensing surface in environments where oil or dust scatters, or steam generates. False detection and cleaning frequency are also reduced.<\/p>\n
\n\nAir blow unit enhances the effectiveness of antifouling coating [PATENTED]<\/strong><\/p>\nUsing an air blow unit greatly reduces the frequency of false detections since it prevents the sensing surface of sensors installed in confined, difficult to clean locations from becoming contaminated. It can be mounted to any photoelectric sensor with a 25.4 mm mounting hole pitch as well as the E3AS Sensors.<\/p><\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7457″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][vc_column_text]\n
\n<\/h3>\n2. Front protection cover reduces sensor failures<\/span><\/h3>\n\n\nWelding spatter on the sensing surface or collision during operation can cause a sensor failure, and the sensor sometimes need to be replaced. Mounting the front protection cover prevents sensor failures. When any problems occur with the front protection cover, just replace it. There is no need to replace the sensor and rewire it.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7458″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\nUnique case design reduces the frequency of replacements caused by failure<\/strong><\/p>\n\n\nThe sensor case is made of stainless steel (SUS316L). OMRON\u2019s unique laser welding technology for different materials enhances the sealing and adhesion between the stainless steel and resin. The laser welding technology for metals are used to weld the case and cover of the E3AS-F Sensor for secure sealing and adhesion between the stainless steel.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7459″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n
\n3. Laser welding technology<\/strong><\/span><\/h3>\nLaser welding technologies for different materials\/metals for increased environmental resistance<\/strong><\/div>\n[\/vc_column_text][image_with_animation image_url=”7460″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\nThe sensor case is made of stainless steel (SUS316L). Omron\u2019s two unique technologies, laser welding technology for different materials and laser welding technology for metals, enhanced the sealing and adhesion between stainless steel and resin.<\/p>\n
Laser welding technology for different materials<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7461″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\n\n\n\n\nIt is a technology to weld different materials, resin and metal, using laser beams. Small holes are bored into the metal case, then melt the resin part by laser. The melted resin fills the holes for secure sealing and adhesion.<\/p>\n
Laser welding technology for metals<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7462″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe metal case and cover are welded by a laser beam to seal the gaps. This provides higher airtightness compared to adhesives, keeping out water, oil and other substances to reduce failures.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n
<\/h3>\n4. Aesthetic of Sensor<\/span><\/h3>\nFlexible installation saves design time<\/strong><\/p>\n\n\nSensor space limitations make equipment design and retrofit work complicated, resulting in time-consuming work. The E3AS Series can be installed in challenging locations, which reduces design and commissioning time.<\/p>\n
\n\nOLED display and teaching enable easy, quick, and optimal setting<\/strong><\/p>\n\n\nE3AS Sensors allow virtually anyone to set optimal settings on the easy-to-read OLED display using the teaching method. Moreover, easy-to-standardize operability makes remote instructions simple.<\/p>\n
Easy-to-read, easy-to-understand OLED display [CMOS E3AS-HL]<\/strong><\/div>\n<\/div>\n\n\nDisplaying the threshold level and detected value on the same screen makes threshold level setting easy. In addition, wide viewing angle and display inverting allow on-site workers to easily see the display.<\/p><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7463″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\nSingle teach button prevents inconsistent settings<\/strong><\/p>\n\n\nEasily and consistently set the optimal threshold level using the teach button.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7464″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\n5. Fast and easy setup also when setting a large number of sensors<\/span><\/h3>\n\n\nSensitivity adjustment using the conventional adjuster method requires experience, finesse as well as time since the threshold level must be adjusted one unit at a time.
\nWith the E3AS Series, just press the teach button to automatically set the threshold level, enabling fast and easy setting.<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7465″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n
\n\n\n\n\n\n\n\n\n\n\n\n\nLine commissioning and maintenance with less people in less time with IO-Link<\/strong><\/p>\n\n\nWith IO-Link, reduce commissioning time by batch-setting the sensors and cut troubleshooting time during mass production by utilizing field data.<\/p><\/div>\n
<\/div>\n<\/div>\nReduce commissioning time by batch-writing settings from IO-Link device configuration tool<\/strong><\/p>\n\n\nSetting information can be batch-written to thousands of sensors on a line, effectively reducing commissioning time and inconsistent settings.<\/p>\n
Predictive monitoring and quick recovery by checking and monitoring sensor data<\/strong><\/div>\n<\/div>\n\n\nThe monitor shows light intensity decrease due to sensing surface contamination or other reason, allowing users to take proactive actions to prevent potential false detections. This reduces the frequency of unexpected failures.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7466″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]Look inside the E3AS photoelectric sensor: 3D blowout video<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=MfKBj5fefl0&t=4s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nOmron E3AS Photoelectric Sensors | Easy selection for any application<\/strong><\/p>\n[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=fmOh2wARKts&t=1s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]OMRON E3AS Photoelectric Sensors | Flexible to design for Food Industry without reflectors.<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=epyeroL4Sn0&t=62s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”center” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/product\/omron-e3as\/” text=”View Product”][\/vc_column][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” open_new_tab=”true” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/wp-content\/uploads\/2021\/02\/Omron_Automotive_E3AS_compressed.pdf” text=”View Brochure”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][divider line_type=”No Line”][vc_column_text css=”” text_direction=”default”]\n\n
\n<\/figure>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n
<\/figure>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n\n
Stably detects cans and plastic bottles without reflectors<\/strong><\/p>\n Left image:<\/strong>\u00a0Retro-reflective sensors are used to detect poorly reflective curved surfaces of cans and transparent plastic bottles, but securing installation space for reflectors on multi-lane conveyor lines is difficult.<\/p>\n Right image:<\/strong> The E3AS-HL Sensor, a reflective model capable of detecting the slightest change in the incident light level or distance, can stably detect cans and plastic bottles without reflectors.<\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Complex-shaped, colored, patterned or glossy targets” id=”1699582560790-9″ tab_id=”1699582560791-10″][vc_column_text]\n Left image:<\/strong>\u00a0With spot beam, detection is unstable since the reflected light does not reach the sensor depending on the profile of the target surface. With the line beam of the E3AS-HL Sensor, detection is less affected by the profile of the surface since the reflected light reaches the sensor from any part of the surface.<\/p>\n Right image:<\/strong> Detection is prone to be unstable because color, pattern or reflectivity affects the sensing distance. The E3AS-HL Sensor is less likely to be affected by them, providing stable detection even when packaging materials change.<\/div>\n<\/section>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Long-distance sensing on converging and diverging lines” id=”1699582560828-8″ tab_id=”1699582560829-7″][vc_column_text]\n No reflector is required to design long-distance sensing unaffected by color or material of targets<\/p><\/div>\n<\/section>\n Although retro-reflective sensors are used for long-distance sensing in converging and diverging lines, it is difficult to find installation space for reflectors.<\/p>\n The E3AS-HL Sensor, a reflective model with long sensing distance, does not require reflectors. Moreover, it is less likely to be affected by color even from long distances.<\/p>\n TOF method enables the detection of various workpieces on the conveyor line<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n With conventional photoelectric sensors, prior evaluation was required for each workpiece to be detected. E3AS-F Sensors detect workpieces varying in colors and materials by the set distance. This helps reduce evaluation and adjustment time. Also, they do not detect workers working near the line by mistake.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][tab icon_family=”none” title=”Inclined and close mounting” id=”1699582560867-3″ tab_id=”1699582560867-9″][vc_column_text]\n Install regardless of workpiece shape and angle<\/strong><\/p>\n Curved surfaces of metal workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide-angle, making setup eas<\/p>\n Curved surfaces of low-reflective workpieces tend to affect detection, and it is time-consuming to design the mounting angle. E3AS-HL Sensors can be mounted at a wide angle, making setup easy.<\/p>\n Install in confined spaces or near lights<\/strong><\/p>\n Interference with other sensors must be considered during design. E3AS-HL Sensors prevent mutual interference between up to 4 sensors, allowing close installation for applications like item identification from hole positions.<\/p>\n Effects of lights for cameras and sunlight must be considered during design. E3AS-HL Sensors can be operated under ambient illumination of 20,000 lx, which reaches the best in class level *2. This allows you to install the sensors in the vicinity of lights.<\/p>\n Sensing algorithm detects minimal reflected light from curved surface [PATENTED]<\/strong><\/p>\n The E3AS-HL Sensor is the industry-first laser Class 1 CMOS laser sensor that comes equipped with an FPGA.<\/p><\/div>\n<\/div>\n It performs high-speed sampling of received light waveforms at 10,000 times per second and OMRON\u2019s unique accumulation processing, significantly increasing its sensitivity. It amplifies the slightest amount of light to reliably detect workpieces with glossy surfaces, complex shaped workpieces, black rubber, or other workpieces from which it is difficult to receive reflected light<\/p>\n <\/p>\n Ensures stable operation\u00a0even in harsh environments<\/strong><\/p>\n When a sensor malfunction or breakage due to the environment causes a line stoppage during mass production, it can take a long time to restart. With the protected sensing surface, the E3AS Series helps minimize line downtime and maximize uptime.<\/p>\n Reduces false detection and cleaning frequency [PATENT PENDING]<\/strong><\/p>\n A dirty sensing surface can cause false detection due to the principle of photoelectric sensors. The E3AS Series has an industry-first antifouling coating on the sensing surface which prevents oil mist and dust from sticking to the sensing surface and keeps the lens from fogging as well. This reduces false detection and sensing surface cleaning frequency.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7467″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]Prevents contamination on the sensing surface<\/strong><\/p>\n Dirty sensing surface can cause false detection due to the principle of photoelectric sensors. E3AS Series with the antifouling coating on the sensing surface, which is the industry’s first, prevents water droplets, oil, and dust from sticking to the sensing surface, and keeps the lens from fogging as well. Therefore, the coating prevents contamination on the sensing surface in environments where oil or dust scatters, or steam generates. False detection and cleaning frequency are also reduced.<\/p>\n Air blow unit enhances the effectiveness of antifouling coating [PATENTED]<\/strong><\/p>\n Using an air blow unit greatly reduces the frequency of false detections since it prevents the sensing surface of sensors installed in confined, difficult to clean locations from becoming contaminated. It can be mounted to any photoelectric sensor with a 25.4 mm mounting hole pitch as well as the E3AS Sensors.<\/p><\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7457″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][vc_column_text]\n Welding spatter on the sensing surface or collision during operation can cause a sensor failure, and the sensor sometimes need to be replaced. Mounting the front protection cover prevents sensor failures. When any problems occur with the front protection cover, just replace it. There is no need to replace the sensor and rewire it.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7458″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”75%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n Unique case design reduces the frequency of replacements caused by failure<\/strong><\/p>\n The sensor case is made of stainless steel (SUS316L). OMRON\u2019s unique laser welding technology for different materials enhances the sealing and adhesion between the stainless steel and resin. The laser welding technology for metals are used to weld the case and cover of the E3AS-F Sensor for secure sealing and adhesion between the stainless steel.<\/p><\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7459″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n Laser welding technologies for different materials\/metals for increased environmental resistance<\/strong><\/div>\n[\/vc_column_text][image_with_animation image_url=”7460″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n The sensor case is made of stainless steel (SUS316L). Omron\u2019s two unique technologies, laser welding technology for different materials and laser welding technology for metals, enhanced the sealing and adhesion between stainless steel and resin.<\/p>\n Laser welding technology for different materials<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7461″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n It is a technology to weld different materials, resin and metal, using laser beams. Small holes are bored into the metal case, then melt the resin part by laser. The melted resin fills the holes for secure sealing and adhesion.<\/p>\n Laser welding technology for metals<\/strong><\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7462″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n The metal case and cover are welded by a laser beam to seal the gaps. This provides higher airtightness compared to adhesives, keeping out water, oil and other substances to reduce failures.<\/p><\/div>\n<\/section>\n<\/div>\n<\/div>\n Flexible installation saves design time<\/strong><\/p>\n Sensor space limitations make equipment design and retrofit work complicated, resulting in time-consuming work. The E3AS Series can be installed in challenging locations, which reduces design and commissioning time.<\/p>\n OLED display and teaching enable easy, quick, and optimal setting<\/strong><\/p>\n E3AS Sensors allow virtually anyone to set optimal settings on the easy-to-read OLED display using the teaching method. Moreover, easy-to-standardize operability makes remote instructions simple.<\/p>\n Easy-to-read, easy-to-understand OLED display [CMOS E3AS-HL]<\/strong><\/div>\n<\/div>\n Displaying the threshold level and detected value on the same screen makes threshold level setting easy. In addition, wide viewing angle and display inverting allow on-site workers to easily see the display.<\/p><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7463″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n Single teach button prevents inconsistent settings<\/strong><\/p>\n Easily and consistently set the optimal threshold level using the teach button.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7464″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][vc_column_text]\n Sensitivity adjustment using the conventional adjuster method requires experience, finesse as well as time since the threshold level must be adjusted one unit at a time. Line commissioning and maintenance with less people in less time with IO-Link<\/strong><\/p>\n With IO-Link, reduce commissioning time by batch-setting the sensors and cut troubleshooting time during mass production by utilizing field data.<\/p><\/div>\n Reduce commissioning time by batch-writing settings from IO-Link device configuration tool<\/strong><\/p>\n Setting information can be batch-written to thousands of sensors on a line, effectively reducing commissioning time and inconsistent settings.<\/p>\n Predictive monitoring and quick recovery by checking and monitoring sensor data<\/strong><\/div>\n<\/div>\n The monitor shows light intensity decrease due to sensing surface contamination or other reason, allowing users to take proactive actions to prevent potential false detections. This reduces the frequency of unexpected failures.<\/p><\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7466″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]Look inside the E3AS photoelectric sensor: 3D blowout video<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=MfKBj5fefl0&t=4s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\n Omron E3AS Photoelectric Sensors | Easy selection for any application<\/strong><\/p>\n[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=fmOh2wARKts&t=1s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]OMRON E3AS Photoelectric Sensors | Flexible to design for Food Industry without reflectors.<\/strong>[\/vc_column_text][vc_video link=”https:\/\/www.youtube.com\/watch?v=epyeroL4Sn0&t=62s” el_width=”50″ align=”center”][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”center” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/product\/omron-e3as\/” text=”View Product”][\/vc_column][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_btn size=”medium” open_new_tab=”true” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”https:\/\/glutenfreepleasure.com\/__proxy_domain\/www.precicon.com.sg\/wp-content\/uploads\/2021\/02\/Omron_Automotive_E3AS_compressed.pdf” text=”View Brochure”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][divider line_type=”No Line”][vc_column_text css=”” text_direction=”default”]\n\n\n<\/figure>\n<\/div>\n\nE3AS-HL for complex-shaped, colored, patterned or glossy targets<\/strong><\/span><\/h3>\n
\n\n<\/figure>\n<\/div>\n\n\nE3AS-F for long-distance sensing on converging and diverging lines<\/strong><\/span><\/h3>\n
\n\n<\/figure>\n<\/div>\n\n\n<\/figure>\n<\/div>\n\n\n\n\n<\/figure>\n<\/div>\n\nE3AS-HL for inclined and close mounting<\/span><\/h3>\n
<\/p>\n\n\n<\/div>\n<\/div>\n\n\n<\/div>\n<\/div>\n\n\n<\/div>\n<\/div>\n\n\n\n\n<\/div>\n<\/div>\n[\/vc_column_text][\/tab][\/tabbed_section][divider line_type=”No Line”][\/vc_column][\/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1\/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nFeatures of OMRON E3AS Series<\/h2>\n
1. Antifouling coating on sensing surface<\/span><\/strong><\/h3>\n
\n\n\n\n\n\n<\/h3>\n
2. Front protection cover reduces sensor failures<\/span><\/h3>\n
\n\n\n\n\n\n3. Laser welding technology<\/strong><\/span><\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<\/h3>\n
4. Aesthetic of Sensor<\/span><\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n5. Fast and easy setup also when setting a large number of sensors<\/span><\/h3>\n
\n\n
\nWith the E3AS Series, just press the teach button to automatically set the threshold level, enabling fast and easy setting.<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n[\/vc_column_text][image_with_animation image_url=”7465″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”center” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”50%” max_width_mobile=”default”][vc_column_text]\n\n\n\n\n\n\n\n\n\n\n\n\n<\/div>\n<\/div>\n\n\n\n\n\n