How Long Do Pool Pumps Last?

How long do pool pumps last? Pool pumps are a crucial safety measure to ensure harmful chemicals don’t enter your water. They also help with circulation, filtration, and the pool’s overall appearance. All this being said, it pays to know how long your pool pump should last if you want to avoid needing a replacement if something goes wrong. Read on!

Functions of A Pool Pump

The primary function of a pool pump is to move water from the deep end to the shallow end. The water then circulates through filters and returns via the in-floor or deck jets for bathers to enjoy. This procedure is completed continually; when it isn’t, your pool will begin to look like a swamp. Pool pumps can also be used for other functions:

• Filtration – Pumps can be used to move water through de-liming equipment, sand filters, and cartridge filters to clean them while running.

• Circulation – Circulating pumps are used when there are no return jets (like in European pools).

• Gravity – They are used for natural circulation, low circulation (like in smaller pools), and to achieve a collection even with the floor or ground.

• Storage from one year to another – Pool pumps can be used to move water from one season to the next. Pumps can also displace water in other ways, like replacing it with air in a spa or hot tub. They will last longer than you’d expect if they are not maintained.

Pool Pump Maintenance Tips

Pool pumps are vital to the health of your pool. Without them, there wouldn’t be any circulation – and your collection would quickly become a swamp. If you want to ensure that you’ll have a working pump for some time, there are a few maintenance tips that you should follow:

Know what type of pool pump you have

Different pumps have different maintenance needs. You also need to know if they use an external or internal motor. External motors need more routine cleaning, whereas internal ones are easier to access and clean but may not be as reliable.

Keep an eye on the size

Keeping up with the entire pool pump is crucial because they can become too large (or small) for their designated pools. They will also run at their best when their sizes are correct for the collection.

Keep your filter running smoothly

It is essential to keep your pool water and filter clean. This will allow for proper circulation and filtration, which is crucial for a working pool pump.

Keep your pool clean

Pool pumps keep water levels high enough to make it impossible for chemicals to be pulled into the pump casing by vacuum. If the pool is dirty or full of leaves, the chances of this happening increase dramatically.

Properly clean or replace filter media regularly

Filters remove most impurities from the water and must be replaced every six months to prevent strain on the pump motor. If the filter begins to leak and sediment clogs its strainer, it should be replaced immediately.

Keep water moving with a mixing system

Beading on the swimming pool can cause the formation of tiny stones that cause pump strain and damage beyond repair. Use a multi-stage pump to provide circulation and flow.

How long do pool pumps last?

The lifespan of a pool pump will depend on an array of factors, including your climate, how often you use the pump, and electrical usage, among other things. It can be tough to pinpoint when it’s time for a replacement, but some indicators may provide clues as to when this might be necessary, such as loud noises from the pump or decreased pressure on water flow through the filter. Ideally, it would help if you keep your pool pump running for at least two years following installation.

Signs You Need A New Pool Pump

Loud Hissing Noise

A new pool pump is supposed to be quiet. This is not good if you have a system that makes a loud hissing noise. It likely means there are air bubbles in the lines, or it is not connected correctly. You need to make sure you have the right parts and use them to fix them.

Pool Is Not Clean Or Clarity Is Low

The point of having a swimming pool has crystal clear water. If you see brown or black stains in the water, it could mean algae problems are brewing in your pool. If your collection looks murky or dirty, this probably means that your current pump is not functioning correctly and needs to be replaced.

Pool Lights Not Working

If you have lights in your pool, they should come on when the current pump is running. If you see that the lights do not turn on, the motor is not being used; it is likely the culprit for many other issues you are having. It would help if you replaced it before something else happened to it.

No Bubbles Or Waterfall Effect When Running The Pump

You do not want to see bubbles or a waterfall effect from a new pump when it is running. This means the water volume is not being pushed through properly, and you need to check to see if this is the case. This is often caused by a plugged filter or cracked pump casing.

Red Light Shows Up When Pump Is Running

A red light should not show up on a pool pump operating correctly. While it might be challenging to see from the back of a pool, you need to make sure that there are no other problems with your system and look for other signs of trouble. You should also ensure that the motor makes noise when it starts up and stops when it runs smoothly.

How Long Do Pool Pumps Last? – Conclusion

Pool pumps are vital for your pool’s successful functioning, whether a small backyard pool or an Olympic-sized swimming pool. Without the proper maintenance and upkeep, they will eventually stop working and have to be replaced. At least two years should be spent before you decide to return your pump.